Your Trusted Cork Supplier in Brisbane
August 25, 2026
A timber floor can look perfect on day one. Then real life begins.
Shoes bring in grit. Chairs scrape across the dining room. Children race through the hallway, and pets rarely stop to wipe their paws. Before long, the finish has a much harder job than simply making the timber look good.
That is why choosing the right coating matters.
Bona Mega ONE and Bona traffic GO are both water-based floor finishes. Both are easy to work with, need no separate hardener and protect timber without the strong yellowing linked with some older coatings.
Still, they aren’t the same product. One is designed for reliable everyday protection. The other is made for floors that face much heavier wear.
So, which one suits your floor?
| Feature | Bona Mega ONE | Bona Traffic GO |
|---|---|---|
| Product type | One-component water-based top coat | One-component water-based top coat with two-component performance |
| Best suited to | Domestic and light-commercial timber floors | High-traffic residential and commercial timber floors |
| Mixing required | No | No, the built-in hardener activates during application |
| Sheen choices | Matt and Satin | Extra Matt, Matt and Satin |
| Timber appearance | Warm, clear appearance | Clear, non-yellowing appearance |
| Drying between coats | 1 to 2 hours | 2 to 3 hours |
| Maximum hardness | Up to 7 days | Up to 3 days |
Bona Mega ONE is designed to make floor finishing simpler.
There is no separate hardener to measure or mix. This makes the product easier to prepare and avoids mixed material being left to expire in the container.
It dries in about 1 to 2 hours between coats and is easy to abrade. Maximum hardness can take up to 7 days, depending on site conditions.
It is a practical choice for normal day-to-day use.
Bona Mega ONE suits domestic timber floors and light-commercial spaces, such as bedrooms, living rooms, home offices and quieter work areas. It protects the surface while bringing out a warm timber appearance.
Hallways, kitchens, shops, offices and large family living areas can face near-constant foot traffic. In these spaces, the finish needs to stand up to more wear without making the job harder than it needs to be.
That is where Bona Traffic GO comes in.
Bona Traffic GO is a one-component top coat designed to deliver two-component performance. Its built-in hardener activates during application, so there is no separate hardener to mix and no pot life to manage.
It is made for high-traffic residential and commercial timber floors.
It is also 100 per cent polyurethane, non-yellowing and available in Satin, Matt and Extra Matt. That Extra Matt option is useful when you want strong protection with a low-sheen, natural appearance.
It dries in about 2 to 3 hours between coats and reaches maximum hardness in up to 3 days. Under normal conditions, the floor can generally return to full use after 24 hours, subject to the product instructions and site conditions.
There is no single winner because the right finish depends on the floor.
Choose Bona Mega ONE when:
Choose Bona Traffic GO when:
A quiet bedroom and a busy café don’t face the same level of wear. Paying for extra durability where it isn’t needed may add little value. On the other hand, choosing a lighter-duty finish for a busy entrance may mean the floor needs attention sooner.
Match the coating to the room, not simply to the product name.
A new coating can only perform well when the surface beneath it is properly prepared.
Over time, timber floors may collect layers of maintenance polish. Dirt, black heel marks and cleaning residue can also build up. Applying a new finish over those layers may affect how well it bonds.
Bona Remover 1L is a concentrated alkaline polish remover. It removes care-product build-up before recoating. It can also help clean very dirty floors and stubborn black heel marks.
Bona Remover does not replace sanding when the existing coating is damaged, badly worn or unsuitable for recoating.
Before recoating, check:
Always follow the product instructions. If the old finish is unknown, ask a flooring professional before starting.
Bona Mega ONE and Bona Traffic GO solve two different problems.
Mega ONE is suited to domestic and light-commercial floors. Traffic GO provides greater wear resistance for high-traffic homes and commercial spaces.
Bona Remover helps remove suitable care-product build-up and grime before recoating.
For the best result, consider the traffic level, existing coating, preferred sheen and required preparation.
Not sure which finish suits your timber floor? Contact our team for product advice, preparation guidance and help choosing the right Bona floor coating for your project.
