Description
DIRECTIONS:
Recommended for use when rejection occurs (coating pulling back to form ‘craters’ or ‘fisheyes’).
Dampen a clean rag with Urethane Coatings THINNERS of CLEANING SOLVENT and wipe over the floor. Every 4-6 m² rinse the rag in clean THINNERS or CLEANING SOLVENT, thereby removing surface contaminants rather than further smearing contaminants over the floor.
Add 10mls of FLOWMAX per litre of MONOTHANE, and stir thoroughly. Soon after application, inspect surface for rejections (‘craters or fisheyes’). Continue adding FLOWMAX in increments of 10mls per litre until the surface is free from rejections.
If rejection occurs when coating with MODIFIED OIL GLOSS, TUNGSEAL, or MODIFIED OIL SATIN add up to 5mls of FLOWMAX per litre of MODIFIED OIL GLOSS, TUNGSEAL, or MODIFIED OIL SATIN, and apply using a worn lambs wool applicator.
** When mixed with FLOWMAX take extra care to modestly apply MODIFIED OIL GLOSS, TUNGSEAL, or MODIFIED OIL SATIN as if applied vigorously the presence of FLOWMAX may stimulate additional bubbling or mild foaming.
Do not mix with Timberseal.
Contains 450gms per litre of Aromatic Hydrocarbons.
SHELF LIFE:
This product is best if used within 24 months from manufacture (refer to batch number), when stored in unopened containers under normal conditions of temperature and humidity.
